Filter
Top Products
FIGURE 21.
3.
Tighten the outside nut against the inside nut,
using two 1/2 II wrenches. See figure 22.
NOTE
Friction pads must be replaced when
the inside of cam lever touches the
housing.
FIGURE 23.
STEERING SHAFT
Lubricate steering shaft at least once a season
with light oil.
TRANSAXLE
The transaxle is lubricated and sealed at the fac-
tory and does not require checking. If disassem-
bled for any reason, lubricate with 24 oz. of E.P.
Lithium grease.
FRONT WHEELS
The front wheels are provided with grease fittings.
Lubricate at least once a season with automotive
multi-purpose grease.
PIVOT POINTS
Lubricate all pivot points with light oil at least
once a season.
,'
..:;;.
~WARN~N_G- .
Disconnect the spark plug wire
and ground against the engine be-
fore performing any repairs or main-
tenance.
FIGURE 22.
CRANKCASE OIL
Check the oil level in the crankcase before each
use of the machine and after every five hours ofoperation.
Oil level should be maintained as in-
structed in the separate engine manual.
After the first five hours of operating a newengine,
drain the oil from the crankcase while
engine is still hot and refill crankcase with new
oil; thereafter change the oil every 25 hours ofoperation.
Refer to the engine manual.
STEERING GEARS
Lubricate teeth of steering gears with automotive
multi-purpose grease after every 25 hours of
operation or once a season. See figure 23.
14