Filter
Top Products
UC360 User Guide
28
Using Camera Control
Camera Control lets you change the camera status at any point during a call.
• Tap on the UC360 display or from during a presentation.
Camera Control shows the actions you can take depending on the state of your call. The diagram
below is representative of the choices you may have and not the actual screen that displays. .
For example:
• To turn the camera off if it’s on, tap .
• To display picture-in-picture (PIP) in a point-to-point call, tap .
By turning on PIP, you will see your camera image on the lower right corner of the display.
By turning on your Self View, you can monitor your video and make any adjustments as needed.
If the camera is being displayed and the user shares an application, the Self View icon is
removed and the control is disabled. This only occurs for the UC360 that has initiated the app
sharing.The remote end point will continue to see their camera.
Self View is disabled on the bridge when there is more than one video call.