9
1% Focus Knob:
Moves the telescope’s objective lens (10, Fig. 1) in a finely-controlled motion
to f
ocus an image.The ETX-80AT telescope can be focused on objects from a distance of
about 17 ft. to infinity. Rotate the focus knob clockwise to focus on distant objects, and
countercloc
kwise to focus on nearby objects.
Note: The first time you focus the telescope, you may have to rotate the focus knob
20 to 40 complete turns as this is a fine focus mechanism which allows you to focus
an image very precisely.
1^ Computer Control Panel:
A. Handbox (HBX) Port
: Plug the AutoStar coil cord (8, Fig. 5) into this port.
B. LED: The red power indicator light illuminates when power is supplied to
the AutoStar handbox and to the telescope’s motor drive.
C. ON/OFF Switch: Turns the Computer Control Panel and AutoStar ON or OFF.
D. Auxiliary (AUX) Port:
Provides connection for current and future Meade acces-
sories, such as the Meade “AstroFinder Software with Cable Connector Kit,” which
allows you to control your ETX from a PC. See
OPTIONAL
ACCESSORIES
, page 32.
1& Base Housing: Contains mechanical and electrical assemblies that operate the telescope.
1* AutoStar with attached cord: See pages 10 to 12 for a description of AutoStar’s
features.
1( Bubble Level/Compass: Use when aligning your telescope. When the bubble is in the
center circle, the base is level.
The Tripod
2) Base: Attach the telescope to the base.
2! Adjustable Tripod legs: Support the telescope. The height of the legs can be adjusted.
See
2% below.
2@ Accessory tray: Place eyepieces and other accessories on the tray. Holds the AutoStar
handbox as well. Attach to one of the leg braces. See
2$ below.
2# Locking Knob: Rotate to secure the tripod legs. Be sure to loosen this knob before col-
lapsing the tripod.
2$ Leg Braces: Strengthens the tripod legs.
2% Leg Locks: Lift the lever to move the inner tripod leg segment in or out when adjusting the
height of the tr
ipod.