5
Observe
You can now use the AutoStar Arrow keys to move the tele-
scope up, down, right, or left. To change the speed at which
the telescope moves (sometimes called the slew speed),
briefly press the Speed/? key. Each press decreases the
slew speed down one level, and then will cycle back to the
fastest speed.
Sight along the side of the telescope’s main tube to locate
an object. At first, practice during the daytime. Use the
AutoStar’s Arrow keys to center on objects in the tele-
scope’s field of view. Observe trees, mountains, signs and
so forth. Then when you’re comfortable locating objects in
this manner, try observing at night on the Moon, planets
and stars.
Note about the Flip Barlow: To use the built-in flip Barlow,
rotate the the Flip Barlow control so that it is in the down
position (see diagram, left). The Flip Barlow doubles the
magnification of your eyepiece.
If you use the Flip Barlow, you will need to turn the focus
knob in a counterclockwise direction.You may have to turn
the focus knob 20 or more turns to focus with the Barlow
engaged.
Step 7: Install batteries..
Step 8: Plug in handbox and turn on
computer control panel.
Sight along the top of the optical tube.
Note: Flip Bar
lo
w control in the “down” posi-
tion.
Flip Bar
lo
w in
do
wn position.