Filter
Top Products
Grind these edges.
DISASSEMBLING
ASSEMBLING
(2) Disaasemble Cutter shaft and Ball bearings from Head case complete. (Fig. 10)
(1) Take reverse step of the disassembly. (Fig. 10, 11)
Note: • Pay attention to the assembly direction of Washer and Bearing washer.
• Shaft end can be fitted into the square hole of Cutter shaft by twisting it with pliers to match their angles
without disassembling Head case.
Fig. 10
Square hole of
Cutter shaft
Hex wrench 5
1R308
Head case complete
Fig. 11
Cutter holder Washer
Spring washer M8
Head case
Collar Ball bearing
608ZZ
M5x25
Hex socket
head bolt
Ball bearing
608DDW Cutter shaft Bearing washer
Hex wrench 5
Hex wrench 5
vise
Head case complete
Repair
P 5/ 14
[4] DISASSEMBLY/ASSEMBLY
[4]-4. Head case complete (cont.)
Head case
complete
Ball bearing
608DDW
Arbor press
1R286
1. Make Hex wrench 5 square shape by grinding its two diagonal edges
and insert it into the square hole of Cutter shaft.
2. Fix Head case with vise and lock Cutter
holder with 1R308. Then, turn Wrench 5
counterclockwise and disassemble
Cutter holder.
3. Remove Cutter shaft with Arbor press.
And then, remove Ball bearing 608DDW
by using 1R286.