Filter
Top Products
[4] DISASSEMBLY/ASSEMBLY
[4]-3. Shaft pipe complete
DISASSEMBLING
ASSEMBLING
(1) Loosen two M5x25 Hex socket head bolts and remove Clamp cover B and Loop handle. (Fig. 7)
(2) Remove 4x18 Tapping screws (4pcs) and M5x14 Hex socket head bolts,
then separate Lever case R and L. (Fig. 8)
Take the disassembling step in reverse.
Fig. 7
4x18 Tapping screw
(4pcs)
Lever case set
M5x14 Hex socket
head bolt (2pcs.)
Fig. 8
Shaft pipe
complete
M5x25 Hex. socket
head bolt (2pcs.)
Loop handle
Clamp cover B
Repair
P 4/ 14
Fig. 9
Shaft pipe
complete
Hex bolt
1R308
Cutter
assembly
Cutter holder
Head case
complete
Protector
Hex socket
head bolt
M5x25
Hex socket
head bolt
[4] DISASSEMBLY/ASSEMBLY
[4]-4. Head case complete
DISASSEMBLING
(1) Disassemble Protector and Head case complete. (Fig. 9)
Shaft pipe
complete
Shaft pipe
complete
(3) Disassemble Shaft pipe complete by following the disassembly step of the chapter [4]-2.
(4) Pull out a shaft from Shaft pipe complete.
1. Disassemble Protector by removing
Hex bolt (2pcs) and Hex socket bolt (1pc).
2. Insert 1R308 in a hole on Cutter holder to
lock shaft and remove Cutter assembly by
turning it clockwise.
3. Loosen M5x25 Hex socket head bolt
and remove Head case complete.