Filter
Top Products
33
Section 4: Options & Accessories
10/21/15
RC4015 and RCM4015 Series 2 S/N 944961+ Rotary Cutters 330-845M
Table of Contents
Section 4: Options & Accessories
Safety Guard
!
DANGER
Rotary Cutters have the ability to discharge objects at high
speeds; therefore, the use of front and rear safety guards is
strongly recommended when cutting. Specifically, double row
chain guards should be used along highways and in areas
where people may be present.
!
DANGER
Safety shields will not stop all objects. Therefore, Land Pride
recommends using extreme caution when cutting in public
areas. Stop blade rotation if bystanders come within several
hundred feet.
Land Pride offers three types of safety guards to best suit
your application: rubber skirt guards, single row chain
guards, and double row chain guards.
• Rubber skirt guards are designed for light duty
applications.
• Single row chain guards are constructed with a single
row of hanging chain links. They can withstand harsher
applications than rubber skirts.
• Double row chain guards are constructed with two
staggered rows of hanging chain links. The second row
provides an additional barrier for stopping thrown
objects.
Rubber Guards
330-482A Front Rubber Guards
330-494A Rear Rubber Guards
Single Chain Guards
330-481A Front Single Row Chain Guards
330-493A Rear Single Row Chain Guards
Double Chain Guards
330-483A Front Dual Chain Guards
330-495A Rear Dual Chain Guards
Tire & Axle Options
Land Pride offers three different tires and three axle
arrangements to best suit your application:
• Laminated tires: They are constructed of laminated
layers of solid rubber that will never go flat.
• New foam filled tires: They are built tough to withstand
the rugged use a cutter receives, provides a smoother
ride when transporting and won’t go flat.
• Used aircraft tires: They are built tough to withstand
the rugged use a cutter receives and to provide a
smoother ride when transporting.
• 4 - Wheel axle arrangement: Two tires on transport
axle and one on each wing axle.
• 6 - Wheel axle arrangement: Four tires on transport
axle and one on each wing axle.
• 8 - Wheel axle arrangement: Four tires on transport
axle and two on each wing axle.
Hitch Options
The cutter is factory supplied with the standard clevis
hitch. Other optional hitches are available. See “Hitch
Types” on page 12 for complete description of optional
hitches.
330-498A Standard Clevis Hitch
330-333A Bar-Tite Hitch (Optional)
330-335A Ball Hitch (Optional)
330-501A Pintle Hitch (Optional)
334-045A LP Performance Hitch (Optional)