Filter
Top Products
7
Introduction
12/09/15
AR2596 & AR2510 Pasture Aerators 325-127M
Table of Contents
Owner Assistance
The Online Warranty Registration should be completed
by the dealer at the time of purchase. This information is
necessary to provide you with quality customer service.
The parts on your Pasture Aerator have been specially
designed by Land Pride and should only be replaced with
genuine Land Pride parts. Contact a Land Pride dealer if
customer service or repair parts are required. Your Land
Pride dealer has trained personnel, repair parts, and
equipment needed to service the implement.
Serial Number
Model No. _____________Serial No. ______________
For quick reference and prompt service, record model
and serial number in the spaces provided above and
again on warranty page 25. Always provide model and
serial number when ordering parts and in all
correspondences with your Land Pride dealer. Refer to
Figure 1 for the location of your serial number plate.
Serial Number Plate Location
Figure 1
Further Assistance
Your dealer wants you to be satisfied with your new
Aerator. If for any reason you do not understand any part
of this manual or are not satisfied with the service
received, the following actions are suggested:
1. Discuss the matter with your dealership service
manager making sure that person is aware of any
problems you may have and has had the opportunity
to assist you.
2. If you are still not satisfied, seek out the owner or
general manager of the dealership, explain the
problem, and request assistance.
3. For further assistance write to:
Land Pride Service Department
1525 East North Street
P.O. Box 5060
Salina, Ks. 67402-5060
E-mail address
lpservicedept@landpride.com
30055
Introduction
Land Pride welcomes you to the growing family of new
product owners.
This Pasture Aerator has been designed with care and
built by skilled workers using quality materials. Proper
assembly, maintenance, and safe operating practices will
help you get years of satisfactory use from this machine.
Application
The Land Pride 25 Series Pasture Aerators are pull type
Aerators designed to hitch to a standard drawbar or a
hammer strap type drawbar. They have uses and
applications in agricultural conservation tillage and
pasture renovations and are available in 8 ft. and 10 ft.
widths. The heavy duty knife like tines on the Aerator are
designed with a twist in them to fracture compacted soil
as they slice into the ground in a twisting fashion. This
fracturing of the soil conditions the soil to soak-up run-off
water faster, allow fertilizer to penetrate deeper into the
ground and increase oxygen supply to the plant roots.
The twisted tines are constructed of hardened forged
steel mounted on a heavy duty rotating shaft that can be
angled up to 7 1/2
o
for an aggressive action. Optional
concrete weights can be added to the Aerator. These
weights provide significantly increased down pressure on
the tines.
See “Specifications and Capacities” on page 21 and
“Features and Benefits” on page 22 for additional
information and performance enhancing options.
Using This Manual
•
This Operator’s Manual is designed to help familiarize
the operator with safety, assembly, operation,
adjustments, troubleshooting, and maintenance. Read
this manual and follow the recommendations to help
ensure safe and efficient operation.
• The information contained within this manual was
current at the time of printing. Some parts may change
slightly to assure you of the best performance.
• To order a new Operator’s or Parts Manual, contact
your authorized dealer. Manuals can also be
downloaded, free-of-charge, from our website at
www.landpride.com
Terminology
“Right” or “Left” as used in this manual is determined by
facing the direction the machine will operate while in use
unless otherwise stated.
Definitions
IMPORTANT: A special point of information related
to the following topic. Land Pride’s intention is this
information must be read & noted before continuing.
NOTE: A special point of information that the
operator should be aware of before continuing.