Filter
Top Products
21
Section 6: Specifications & Capacities
12/09/15
AR2596 & AR2510 Pasture Aerators 325-127M
Table of Contents
AR25 Series
Specifications & Capacities
Model No. AR2596 AR2510
Horsepower Requirements 40 - 90 HP
Working Width 7' - 2" 9' - 8"
Overall Width 8' - 1 3/8" 12' - 3 5/8"
Overall Length 10' - 11" 10' - 11"
Overall Height
(With tines on the ground)
41 1/4" Without concrete Blocks
43 7/8" With Optional Concrete Blocks
41 1/4" Without concrete Blocks
43 7/8" With Optional Concrete Blocks
Weight (w/o added weight) 1,700 lbs. 2,200 lbs.
Number of Tines 24 LH and 24 RH (Four per hub) 32 LH and 32 RH (Four per hub)
Tine Material Forged and heat treated through steel
Tine Hub Spacing 7 1/2"
Tine Penetration Up to 8" (Depending on ground conditions and added weight)
Frame Construction 4 x 4 tubing all welded construction
Hitch Type
Heavy duty pull type with clevis hitch
Receives up to 1 1/4" pin dia. (2-positions)
Main Tongue Beam 4" x 4" x 5/16" Wall tubing
Hitch Jack
Tongue support jack (5,000 lb. load rating)
(Stores on pull frame)
Rotor/Tine Support Hangers Heavy Duty
Rotor Bearings Heavy Duty greaseable bearings with triple lip seals
Rotor Bearing Protection Bump Guards
Rotor Angle Adjustment Angles from 2 1/2, 5 & 7 1/2 degrees
Manual Storage Tube Included
Tires 2 ea., 9.5L x 15, 8 ply
Rims 6-bolt
Tine Depth Control Add cylinder donuts to cylinder rod - included
Hydraulic Couplings Quick disconnects included
Hydraulic Cylinder 3" x 8" stroke with 1 1/4" rod dia.
Transport Lock Manual cylinder lock
Rear Axle Pivot Greaseable
Options
Concrete Blocks 25" square x 18" high
Number of Concrete Blocks Available in quantities of 2 or 3 Available in quantities of 2, 3, or 4
Weight per Concrete Block 740 lbs.
Lifting Bar 1/2" Round bar built in concrete block
Drag Harrow
See Drag Harrow Operator’s Manual 322-207M for a complete list of specifications.
(Order model DRG08 as a stand alone unit.)
Weight DRG08 = 185 lbs.
Settings Three positions: Light, Medium, and Aggressive
Drag Harrow Lift
Can be added to lift Drag Harrow off the ground without getting off the tractor.
Drag Harrow sold separately,
Weight 345 lbs.
Hydraulic Cylinder 2" x 8" stroke with 1 1/8" rod dia.
Transport Lock Included
Slow Moving Vehicle Sign Included
Accessories
Trailing Hitch Self leveling (Buy through Parts, Part No. 325-118A)
Corner Protector Protects straps from concrete corners (Buy through Parts, Part No. 816-646C)
Section 6: Specifications & Capacities