Filter
Top Products
MAINTENANCE
OM 0408SB1174-A
36
LUBRICATION
Use oil or a grease gun and lubricate as follows:
DESCRIPTION INTERVAL LUBRICATION REQUIRED
Driveline
8 hours
Grease each universal joint. Separate the sliding
parts and cover each one of them with grease
16 hours Oil the push pins
Chain
4 hours
and after each operation
Lubricate with chain lube
Drive Shaft 24 hours of operation Grease fitting on shear plate
Gearbox
Every month
Check oil level. If needed, add AGMA 5EP extreme
pressure oil, SAE 80W90 gear oil or equivalent.
Once a year Replace oil
Bearing 24 hours of operation Grease each auger and drive shaft bearing