Filter
Top Products
Page 85
J-400
4. Preset Scan Function
Press AS/PS button (6) once to enter scan mode. Each preset
station in the current band will play for 5 seconds while the preset
number is ashes on the display (17). At the desired station, press
AS/PS button (6) a second time.
5. Accessing Preset Stations
Press and hold ENT/SH button (9) until display reads “SHIFT”.
Repeatedly press TUN Up/Down button (2) to choose preset 1-6,
then press ENT/SH button (9) to conrm selection.
19.4 J-1000 Audio System CD Player Operation
1.
Open front panel (16) by pressing rmly on release button (15) and
lifting panel upward from bottom edge. Gently insert CD into slot (14)
with label facing up. The CD will be drawn inside by the motorized
mechanism. DO NOT FORCE! Close front panel by folding down,
then press rmly on panel directly above release latch (15) until you
hear an audible “click”. Keep front panel closed at all the times to
prevent water intrusion, except when changing discs. CD playback
will automatically begin after CD is loaded. A “S-CDP” icon on the
display indicates that a disc is inside the mechanism.
To Play CD: Press the MODE button (4) to change to CD mode. •
The CD will play. The display shows current track, play time, and
animates a 3-D rotating disc during playback.
To Remove CD: Open the front panel and press CD eject button •
(13). Remove CD from drive and close front panel as instructed in
step 12 (page 84).
2. Changing CD Tracks and Music Seek
To advance to next track, press TUN Up button (2) once to increase
track counter one track. When nal CD track is reached, play will
resume on track #1.
To fast forward through tracks: Press and hold TUN Up button (2) •
until track counter displays desired track, then release button.
To rewind current track: Press and hold the TUN Down button (2) the •
track will quickly rewind until you release the button.
Note: It will go back to the beginning of the playing track when you press
the Tune/Seek down button once, and it will go back to the previous track
when you press the button once again.
3.
Random Mode: Press SH button (9) to play the CD tracks in random •
order. The left side of the display (17) reads “RDM” when random
mode is enabled. Press a second time to deactivate.
Repeat Mode: Press BND button (8) to repeat current CD track. The •
left side of the display reads “RPT” when repeat mode is enabled.
Press a second time to deactivate.