Filter
Top Products
Page 55
J-400
12.0 Programming Instructions for Settings 1 Menus
Your Jacuzzi spa is equipped with two settings menus that allow you to
program and activate different components of the spa. In the “Settings
1” menu you can program the Language, Date and Time, Lock/Unlock
the spa and the check/clean lter reminder. You can also access the
“Settings 2” menu (Section 13.0, page 59).
12.1 To access the Settings 1 Menu:
1. Press button D from the Main Menu (page 35) to enter the Settings 1
Menu (Figure A).
2. From this menu you can choose a language (either English or
Français), set the time and date, lock/unlock the spa, set the change/
clean lter remainder and check the “on” or “off” status for the ozone
(if equipped, the ozone is not programmable).
12.2 Choosing the Language
1. Press button A to enter the
Language submenu. The screen will
change to the Figure B.
Note: English is the default language.
2. Use the Quad Keypad to switch
between English and Français by
pressing the Up or Down button.
3. Press the Splash button to save your change. The screen will return
to the Settings 1 Main Menu.
Press to
set filter timer
Language
Ozone
Filter
OFF
ENG
5 43
SETTINGS 1
C
B
A
D
Figure A
Figure B
5 43
LANGUAGE
Select
English
ENG
Français
FRA
English
ENG
FRA
Press to save