Filter
Top Products
Page 73
J-400
15.2 Sanitizing
To destroy bacteria and organic compounds in the spa water, a sanitizer
must be used regularly. Chlorine and bromine are the two most popular
sanitizers used to date. The “Proclear Mineral Spa Clarier” designed
especially for your hot tub is a benecial product for water maintenance.
Many other additives are available for your spa. Some are necessary to
compensate for out-of-balance water; some aid in cosmetic water treatment
and others simply alter the feel or smell of the water. Your authorized Jacuzzi
dealer can advise you on the use of these additives. When adding spa
shock (chlorine or non-chlorine) or pH balancing chemicals activate the
jets pump(s) and leave the spa cover open for a minimum of 20 minutes.
By doing this you will allow excessive chemical vapors to exit the spa,
protecting pillows and plastic knobs from chemical attack.
WARNING:
OR ENTRAPMENT!
Never leave your hot tub unattended for any reason while the
cover is open and accessible, especially to small children and
animals!
CAUTION: RISK OF PERSONAL INJURY OR SPA DAMAGE!
Never add chlorine tablets (trichlor) or acid to your hot tub for
any reason! These chemical may damage components within
your hot tub, burn or irritate your skin, create a rash and void
the manufacturer warranty for your spa.
!
15.3 Other Additives
Many other additives are available for your spa. Some are necessary
to compensate for out-of-balance water, some aid in cosmetic water
treatment and others simply alter the feel or smell of the water. Your
authorized Jacuzzi dealer can advise you on the use of these additives.
15.4 Ozone Water Maintenance System (Optional)
This system is optional on North American models and standard
equipment on export 50 Hz models. If your spa is equipped with the
Jacuzzi CD ozone water purication system you will nd that your water
stays fresh and clear with signicantly less chemical usage. You will
probably be able to go longer between complete spa drainings.
Note: To maximize sanitation benets from this product, always turn off
the spa waterfall valve when the spa is covered or not in use. This setting
ensures maximum water ow through the ozone injector and higher
ozone concentrations. The ozone only runs when the circulation pump
is running and shuts off when either jets pump is manually activated
during spa use. The ozone will remain off for 5 minutes after both jets
pumps time out or are manually turned off, then resume operation as
programmed.