Filter
Top Products
Page 61
J-400
2. From this menu (Figure F), you can
set the days, times, and duration.
With “Day Settings” selected press
the Splash button on the Quad
Keypad to access the submenus.
3. When you enter the submenu
(Figure G), you can choose the
day(s) you would like “Program A” to
run for a heating cycle. Press the Up
or Down button (on the Quad
Keypad) to scroll through and
choose the days you would like the
heater to activate. Press the Left or
Right button to turn “ON” ( ) or
“OFF” the heater for that day.
4. Press the Splash button once to save settings.
5. Press button D to return to the submenu (Figure F) to continue
programming the start time and duration.
6. Press the Down button on the Quad
keypad to select “Start Time” (Figure
H). Press the Left or Right button on
the Quad Keypad to select the time
you wish the spa to run. Press the
Down button to access the
“Duration” submenus.
Note: If you are using a standard 12-
hour period, you will see the hour displayed as “1PM”. For the
24-hour period it will read “1300”.
7. Now you will need to adjust the
cycle “Duration” (Figure I). Cycle
duration range is adjustable from 0
(OFF) to 6 hours. Press the Left or
Right button on the Quad Keypad to
make adjustments in increments of 1
hour.
Figure F
PROGRAM A
Start Time
Day Settings
Duration
Select
A
Day Settings
Press to enter
Figure G
Select
A
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
Press to save
Monday
OFF
OFF
OFF
OFF
OFF
OFF
OFF
PROGRAM A
PROGRAM A
Start Time
Day Settings
Duration
Select
A
Start Time
1PM
Press to save
Figure H
PROGRAM A
Start Time
Day Settings
Duration
Select
A
Press to save
Duration
OFF
Figure I