Filter
Top Products
English
– 13
PRESENTATION
Presentation
Congratulations on your choice of an excellent quality product
that will give you great pleasure for many years.
Power transmission is provided by a hydrostatic gearbox
which allows variation of the speed.
Parking brake
The parking brake is applied as follows:
1 Press down the parking brake pedal.
2 Press in the lock button on the steering column.
3 Release the parking brake pedal while keeping the button
pressed in.
The parking brake lock disengages automatically when the
brake pedal is pressed.
Throttle and choke controls
The throttle control regulates the engine speed, and thereby
also the rotation speed of the blades.
The control is also used to activate the choke. When the
choke is engaged a richer fuel and air mixture is fed to the
engine, which facilitates starting in the cold.
Drive Controls
This is a variable speed machine. The ground speed is
regulated with two pedals. Pedal (1) is used to drive forwards,
and pedal (2) to drive backwards.
Cutting unit
The mower has a 2-blade cutting deck with side ejection.
Lifting lever for the cutting unit
The lift lever is used to set the cutting unit in transport or
mowing position.
If the lever is pulled backwards the unit is raised and the
blades automatically stop rotating (transport position).
If the lever is moved forwards, the cutting deck will be lowered
and the blades will automatically start to rotate (mowing
position).
The lever can also be used to temporarily regulate the cutting
height, e.g. for a small mound in the lawn.
!
WARNING! Make sure that branches do not
obstruct the pedals when mowing under
bushes. Otherwise there is a risk you may
lose control.
2
1