Husqvarna 343R, 345RX, 343F, 345FX, 345FXT Brush Cutter User Manual


 
29
3
Disassemble the throttle control (A), the
lock to prevent accidental throttle
operation (B), the start throttle lock (C)
and the throttle stop (D) in order to
check if replacement is necessary.
The stop switch can also be disassem-
bled now, and replaced if necessary.
Use a screwdriver to press the stop
switch’s wing locks (E).
Tip!
Reassembly of the throttle easier if a
thin steel wire is wrapped around the
handle and bolt (F) in order to hold the
throttle cable and short-circuit cables in
place.
Fuel system