Filter
Top Products
60 - English
9. TROUBLE SHOOTING
R40Li vibrates Damaged knives lead to imbalance in
the cutting system.
Inspect the blades and screws and
replace them if necessary. See 8.6
Replacing the blades on page 53.
Many knives in the same position lead
to imbalance in the cutting system.
Check that only one knife is fitted at
each screw.
R40Li moves but the
blade disc does not
rotate
R40Li is looking for the charging
station.
No action. The blade disc does not
rotate when the mower is searching for
the charging station.
The mower mows for
shorter periods than
usual between
charges
Grass or other foreign object blocks
the blade disc.
Remove and clean the blade disc. See
8.3 Cleaning on page 52.
Both the mowing and
charging times are
shorter than usual
The battery is spent. Replace the battery. See 8.7
Replacing the battery on page 54.
This behaviour is normal at low
temperatures (gradual increase below
15 ˚C).
No action.
The R40Li is parked
for hours in the
charging station.
The mower must stand for at least 11
hours a day in the charging station so
that the battery can rest. See 4.2
Using the timer on page 34.
No action.
Symptom Cause Action