Filter
Top Products
English - 37
5. CONTROL PANEL
The keypad consists of four groups of buttons:
operation selection button, multi-choice buttons,
numbers and start button.
5.1 Operation selection
The operation selection button is symbolised by a
house. When the button has been pressed, the
selected operation mode is shown in the display. By
consecutively pressing the button many times, one
can choose between three different operation modes.
1. HOME:
Sends the mower to the charging station. It
remains here until another operation mode is
selected. The text Home is shown in the
operation window. When the battery is fully
charged, the mower will remain parked in the
charging station.
The Home setting is also used after a new
installation or changes are made to an existing
installation to test if the mower can follow the
guide wire and dock with the charging station. See
3.9 Test docking with the charging station on page
31.
2. AUTO:
The standard, automatic operation mode where
R40Li mows and charges automatically.
MAN:
When cutting secondary areas (see 3.4
Installation of the boundary wire on page 20) the
MAN setting must be used.
If MAN is selected and the mower starts when it is
out on the lawn, it will mow until the battery runs
out. It will then stop and the ‘Needs manual
charging’ message will appear. The mower must
then be moved manually to the charging station
and then started manually after charging.
If the mower charges in the MAN mode, it will fully
charge, move about 20 cm out of the charging
station and then stop. This indicates that it is
charged and ready to start mowing.
If the main working area has to be cut after
charging, it is appropriate to switch the operation
mode to Auto before placing the mower in the
charging station.
Start
1
4
78
0
9
56
23
Start
1
4
78
0
9
56
23