Filter
Top Products
English - 41
6. MENU FUNCTIONS
6.3 Timer (1)
The lawn should not be cut too often to obtain the
best mowing result. Consequently, it is important to
limit the operating time using the timer function if the
working area is less than the mower's working
capacity. When R40Li is allowed to mow too much,
the lawn may appear flattened. Besides, the mower is
subjected to unnecessary wear.
The timer function is also an ideal means to control
during which periods R40Li should not mow, for
example, when the children are playing in the garden.
The factory setting is 07:00 - 22:00 and it allows
mowing every day of the week. This is normally a
suitable setting for a 400 m
2
working area.
When setting the timer, calculate that the R40Li mows
about 30 m
2
per hour and day.
• Work hours 1 (1-1)
to set start and stop times for operating period 1.
Enter each required time in hours and minutes
and press OK to confirm the entered time.
• Work hours 2 (1-2)
to set start and stop times for operating period 2.
Enter each required time in hours and minutes
and press OK to confirm the entered time.
• Work days (1-3)
to select the days the mower must work. R40Li will
work during the days that are ticked off.
• Reset timer(1-4)
reset values to the factory settings.
To inactivate Work hour 1 or Work hour 2, enter the
time 00:00 - 00:00 to reset the timer to --:-- - --:--.
A clock icon is displayed on the start page when the
timer settings are set. The clock icon is black when the
mower is not allowed to mow due to a timer setting and
it is white when the mower is allowed to cut.
There is an inbuilt standby period of about 11 hours a
day to increase battery service life. The mower is
parked in the charging station during this period. See
4.2 Using the timer on page 34.
Work hour 1
Work
hour 2
Work days
Reset timer
Timer
Security
Inställningar