Filter
Top Products
English - 43
6. MENU FUNCTIONS
Alarm
This function means that an alarm sounds if the PIN
code is not entered within 10 seconds after the STOP
button has been pressed or the mower has been lifted
up for any reason. A ticking noise indicates that the
PIN code must be entered to prevent triggering the
alarm. The alarm can be turned off at any time by
entering the correct PIN code.
New loop signal (2-3)
The loop signal is randomly selected to create a
unique link between the mower and the charging
station. In rare cases, there may be a need to generate
a new signal, for instance if two adjacent installations
have a very similar signal.
• Park the mower in the charging station.
• Select New loop signal in the menu and press OK.
6.5 Settings (3)
The following operating settings are available via this
selection in the main menu.
• Time & Date (3-1)
to set the current time and date, and the required
time and date format.
• Language (3-2)
to select which language is to be used in the
menus.
• Backlight (3-3)
to select whether the display is lit while mowing
or not.
• Remote start (3-4)
to determine how often the mower must follow
the guide wire out from the charging station.
• Calibrate guide (3-5)
to test if the mower can follow the guide wire out
from the charging station.
• Reset user settings (3-6)
to reset the mower to the settings it had when it
left the factory.
Timer
Security
Settings
Time & Date
Language
Backlight
Remote start
Calibrate guide
Reset user settings