Filter
Top Products
HOW TO REPLACE
THE AUGER SHEAR BOLT
The augers are secured to the auger
shaft w_ special shear bolts. These
shear bolts are designed to break and
protect the machine if an object be-
comes lodged in the auger housing. Do
not use a harder bolt as the protection
provided by the shear boltwill be lost.
_lb ARNING: For safety and to
protect the machine, use
only original equipment
shear bolts.
To replace a broken shear bolt, proceed
as follows. Extra shear bolts were pro-
vided with the unit.
1. Stop the engine. Disengage all con-
trois.
2. Disconnect the spark plug wire.
Make sure all moving partshave
stopped.
3. Align the hole inthe auger with the
hole inthe auger shaft. Install the
new shear pin and spacer. See
Figure 45.
4. Connect the spark plug wire.
X
Shear Pin
/ t
Spacer
Figure 45
F-O410111L 32