Filter
Top Products
_- CHECKUST
Before you operate your new snow
threwer, to ensure that you receive the
best performance and satisfac_on from
this quality product, please review the
following ohecldist:
All assembly instructionshave been
completed.
e" The discharge chute rotates freely.
e" No remaining loose parts in carton.
Check the fasteners. Make sure all
fasteners are tight.
v" Check the air pressure of the tires.
Correut air pressure isfrom 14 to 17
PSI. See the side of the _re for maxi-
mum inflation. Do not exceed maxi-
mum inflation.
1t" On e/ectricstart medals, the unitwas
shipped with the starter cordplugged
into the engine. Before operating, un-
plug the starter cordfrom the engine.
While learning how to use your snow
thrower, pay extra attention to the fol-
lowing important items:
v_ Engine oil is at proper level Use a
high quality detergent oil classified
"For Service SG, SH, SJ, SL, or
higher".
Make sure gas tank is filled propedy
with clean, fresh, unleaded gasoline
w_ a minimum of 85 octane..
Become familiar with all controls-
their location and function. Operate
controls before starting engine.
F-O410111L 10