Filter
Top Products
KNOW YOUR SNOW THROWER
READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING
YOUR SNOW THROWER. Compare the illustrationswith your SNOW THROWER
to familiarize yourself with the location of various controls and adjustments. Save
this manual for future reference.
(righthand)
(lefthand)
Choke
Control Gas Crank
Primer Cap / Assembly
Button Chute
Deflector
Discharge
Chute
Safety
Key
Recoil
Starter
Handle
ScraperBar Figure9
Auger Drive Lever. Starts and stops
the auger and impeller(snow gathering
and throwing)
Traction Drive Lever - Propelsthe
snowthrower forwardand h reverse.
Speed Shifter Lever - Selectsthe
spsed of the snow thrower (6 speads for-
wa,,d and 2 speeds reverse).
Crank Assembly - Changes the direc-
tion of snow throwingthrough the dis-
charge chute.
Chute Deflector - Changes the distance
the snow is thrown.
Discharge Chute. Changes the height
and directionthe snow is thrown.
Height Adjust Sldd - Adjuststhe ground
clearance of the auger housing.
F-0410111L
11
Ignition Key - Must push into startthe
engine.
Recoil Starter Handle - Starts the en-
gine manually.
Choke Control - Usedto startacold
engine.
Primer Button . Injectsfuel directJyinto
the carburetormanifold for fast stads in
cold weather.
Electric Start Button - Ofso equipped)
Used to start the engine using the 120 V
electric starter.
Shear Pin - Shear pins are designed to
break (to protectthe machine) if an ob-
j._ becomes lodged inthe auger hous-
_J.
Toolbox - Spare shear pins and spacers
are located in toolbox.