Filter
Top Products
Turbomachinery Package Specification Titan 250 Generator Set
Figure 2. Typical Titan 250 Generator Set Service Connections (Driver Skid)
Table 1. Package Specifications
Dimensions
Approximate Package Measurements
Height, Unenclosed 3.89 m (12 ft 9 in.)
Height, Enclosed 4.12 m (13 ft. 6 in.)
Width (to skid edges) 3.37 m (11 ft 1 in.)
Width (including lifting bollards) 3.60 m (11 ft 10 in.)
Length, Engine Skid 10.29 m (33 ft 9 in.)
Length, Generator Skid
Approximate Package Weights
AC Start Motor Assembly 450 kg (990 lb)
Gas Turbine Assembly 19 050 kg (42,000 lb)
Total Driver (unenclosed package, without oil) 49 900 kg (110,000 lb)
Total Driver (enclosed package, without oil) 57 600 kg (127,000 lb)
Generator (unenclosed)
Piping and Tubing Thickness
Piping > 76.2 mm (3 in.) Nominal Pipe Size (NPS) Schedule 40 (Unless Otherwise Specified)
Piping < 50.8 mm (2 in.) NPS Schedule 80 (Unless Otherwise Specified)
Tubing 3.175 mm (0.125 in.) Nominal Tubing Size
(NTS)
0.889 mm (0.035 in.) Minimum Wall Thickness
Tubing 6.35 mm (0.25 in.) NTS 1.245 mm (0.049 in.) Minimum Wall Thickness
Tubing 12.7 mm (0.50 in.) NTS 1.651 mm (0.065 in.) Minimum Wall Thickness
Tubing 19.05 mm (0.75 in.) NTS 1.651 mm (0.065 in.) Minimum Wall Thickness
Tubing 25.40 mm (1.00 in.) NTS 2.108 mm (0.083 in.) Minimum Wall Thickness
Tubing 31.75 mm (1.25 in.) NTS 2.768 mm (0.109 in.) Minimum Wall Thickness
© 2008 Solar Turbines Incorporated. All rights reserved. TPS250GS/908 - Preliminary
8