Filter
Top Products
Turbomachinery Package Specification Titan 250 Generator Set
11 Enclosure
11.1 General Description
A driver-only or complete package enclosure can be provided as required. The enclosure
housing (Figure 21) is a completely self-contained, weatherproof, insulated, and sound-
attenuated system. The enclosure is mounted on the package skid and supported by a
heavy-duty frame. The enclosure sides include removable panels and/or doors to allow
access to major components for inspection and maintenance and to permit removal of
components by forklift or overhead crane. The engine area is furnished with bi-fold type
doors to facilitate engine removal from either side of the package. All enclosure doors
include a three-point heavy-duty door locking mechanism, handles, hinges, latching
mechanism, internal lock override release, restraining device, and attaching hardware.
The enclosure panels are treated with fiberglass material for sound attenuation and
thermal insulation. Weather stripping is installed between all panels for sealing and sound
attenuation. The enclosure is normally factory assembled on the package skid prior to
shipment, but can be drop shipped pre-assembled for site installation or shipped as a kit
for site assembly and installation. The following standard features are included with the
basic enclosure:
• Inlet and exhaust ventilation silencers
• Single fan ventilation system
• Pressurization system
• AC lighting
• Equipment handling system
• Stainless steel door hardware
Figure 21. Typical Complete Package Enclosure
© 2008 Solar Turbines Incorporated. All rights reserved. TPS250GS/908 - Preliminary
45