Filter
Top Products
Turbomachinery Package Specification Titan 250 Generator Set
Maximum Flow Demand Rate 4.67 nm
3
/min. (165 scfm)
Main Lube Oil Duplex Filters
Type Self-Supporting Pedestal
Duplex Filters 10 Micron
Certification ASME, Section VIII, Division 1
Backup Lube Oil Pump Filter
Type Bowl Filter
Minimum/Maximum Operating Temperatures -54 to 135°C (-65 to 275°°F)
Simplex Filter β X > 75 Micron
Lube Oil Vent Coalescer
Type Air/Oil Mist Eliminator
Maximum Working Temperature 93°C (200°F)
Orientation Vertical
Performance
100% removal of all droplets greater than 3
microns and 99.5% removal of all droplets less
than 3 microns.
Certification ASME, Division 1
Approximate Dimensions (Height x Diameter) 198.1cm x 121.9 cm (77.9 in. x 48 in.)
Approximate Weight 1093 kg (2,410 lb)
Lube Oil Vent Flame Arrestor
Orientation
Vertical, See Note (f)
Approximate Dimensions (Height x Width x
Diameter)
32 cm x 23 cm x 22 cm
(13 in. x 9 in. x 9 in.)
Approximate Weight 11 kg (25 lb)
Strainers
Tank Fill 20 mesh
Gearbox Breather Vent (If Applicable) 40 mesh
Gas Producer Start-Up Strainer
70 Micron, See Note (g)
Gearbox Start-Up Strainer (If Applicable)
70 Micron, See Note (g)
Compressor Driven End Start-Up Strainer
70 Micron, See Note (g)
Compressor Exciter End Start-Up Strainer
70 Micron, See Note (g)
Lube Oil
Viscosity Grade ISO VG 32 (C32) Use When Ambient Temperature is < 110°F
Viscosity Grade ISO VG 46 (C46) Use When Ambient Temperature is > 110°F
Pour Point
Must Be At Least 6°C (11°F) Below The Lowest
Ambient Temperature)
Lube Oil Tank Capacity
11 450 L (3025 gal), See Note (h)
Weight 1995 kg (4,400 lb)
Construction Materials
Piping, Manifolds, and Tubing 316L Stainless Steel
Lube Oil Tank and Tank Covers
Carbon Steel (Standard)
316L Stainless Steel (Optional)
Construction Materials (Cont’d)
Main Lube Oil Duplex Filter Housing and Transfer
Valve
Carbon Steel (Standard)
316L Stainless Steel (Optional)
Backup Lube Oil Pump Filter Housing
Carbon Steel (Standard)
316L Stainless Steel (Optional)
Lube Oil Vent Coalescer
Carbon Steel (Standard)
316L Stainless Steel (Optional)
Lube Oil Vent Flame Arrestor Aluminum
© 2008 Solar Turbines Incorporated. All rights reserved. TPS250GS/908 - Preliminary
27