Filter
Top Products
2009 Portable Spa
LTR20091000, Rev. A
Cleaning and Maintenance
www.calspas.com
33
All-Purpose Cleaner (Spa Finish
cleaning)
Cal Spas™ All-Purpose Cleaner is an essential part of
maintaining your spa’s nish. Through normal use,
the spa’s nish can accumulate dirt, oil, and calcium
causing a rough feel and unsightly scum lines. Cal
Spas™ All-Purpose Cleaner is a low detergent, non-
abrasive cleaner specically formulated to clean the
spa without damaging its acrylic nish.
The most effective solution to minimize cleaning
time is prevention. When the following steps are
followed, the spa’s nish will actually start to resist
most of the elements that cause calcium build-up
and make scum line clean up easier.
Prior to Spa Start-Up and Relling
Spray Cal Spas™ Multi-Purpose Cleaner directly 1.
on to the spa’s nish.
Wipe clean with a clean soft cloth.2.
Repeat on heavily calcied areas.3.
Wipe spa thoroughly with a wet 4.
sponge, rinsing often with a
bucket of clean water.
Allow spa to dry completely.5.
Apply a coat of Cal Spas™ Fast 6.
Sheen to the spa’s entire nish
with a soft towel or sponge.
Allow Fast Sheen to dry until white 7.
and powdery.
Buff clean with a soft cloth, rotating frequently.8.
Periodic Maintenance
Spray Cal Spas™ Multi-Purpose Cleaner directly 1.
to the spa’s nish.
Wipe clean with a clean soft cloth.2.
Wipe spa thoroughly with a wet sponge, rinsing 3.
often in a bucket of clean water.
Cal Spas™ Multi-Purpose Cleaner should not be
sprayed directly into the spa water. Incorrect usage
of this product will cause water clarity issues.
Fast Sheen (Spa Finish Protecting
Wax)
Cal Spas™ Fast Sheen is an essential part of
maintaining your spa’s nish. Through normal use,
the spa’s nish can accumulate dirt, oil, and calcium,
causing a rough feel and unsightly scum lines. Cal
Spas™ Fast Sheen is a non-oil based wax that is
specically formulated to protect the spa’s nish
from the chemicals and minerals associated with
normal spa use.
The most effective solution to minimize cleaning
time is prevention. When the following steps are
followed, the spa’s nish will actually start to resist
most of the elements that cause calcium build-up
and make scum line clean-up easier.
Prior to Spa Start-Up and Relling
Spray Cal Spas™ Multi-Purpose Cleaner directly 1.
to the spa’s nish.
Wipe clean with a soft cloth.2.
Repeat on heavily calcied areas.3.
Wipe spa thoroughly with a wet 4.
sponge, rinsing often in a bucket
of clean water.
Allow the spa to dry completely.5.
Apply a coat of Cal Spas™ Fast 6.
Sheen to the spa’s entire nish
with a soft cloth or sponge.
Allow Fast Sheen to dry until white and 7.
powdery.
Buff clean with a soft cloth, rotating frequently.8.
IMPORTANT: Cal Spas™ Fast Sheen should not be
used on spas full of water. Only apply to clean, cool,
dry surfaces. Incorrect product usage may cause
water clarity issues.