2009 Portable Spa
LTR20091000, Rev. A
Clear Water Plan
www.calspas.com
23
Testing For: Ideal Range
(ppm)
Chemicals To Use:
Minimum Maximum To Raise To Lower
Chlorine level
Without ozonator
With ozonator
3.0 5.0
2.0 4.0
Chlorinating Granules
Bromine level
Without ozonator
With ozonator
6.7 11.0
5.7 10.0
Go Brom
Note: The Cal Clarity bromine generator requires different water chemistry tests. See page 27 for
instructions on its use.
Shocking the Water
In addition to using a chemical sanitizer, you will periodically need to shock the water. Shocking the water
helps remove burned-out chemicals, bacteria, and other organic material from your spa’s water and improves
your sanitizer’s effectiveness.
Do not use chlorinating shock, which will damage your spa’s jets and pump seals. The only shock you should
use is Cal Spas Oxidizer Shock. It is an easy way to maintain either chlorine or bromine chemical plans.
For best results use the directions below.
Add one ounce of Cal Spas Oxidizer Shock:
Once a week•
After heavy bather loads•
If water has a strong odor•
Spa must be running with all of the jets on high for 30 minutes with the cover open. If necessary, repeat
oxidizer shock in 30 minute intervals.
Chemical Safety
Do not exceed chemical dosages as recommended
in the Clear Water Plan or on chemical bottles and
packages.
Never change chemical brands or types without
completely draining, ushing and thoroughly cleaning
the spa and cover rst.
Never mix chemicals together.
Do not allow chemicals to come in contact with skin,
eyes or clothing. Remove and wash clothing that
may have been exposed to chemical contact prior to
wearing them again.
Inhaling or ingesting chemicals will cause serious
injury, sickness, or even death.
Chemicals must be stored completely out of the reach
of children in an area that is well vented, cool, and dry.
Failure to provide a proper area for chemical storage
may result in serious injury, sickness, re explosion
and even death. Do not store your chemicals inside
the equipment area of your spa.
Read and follow all printed instructions listed on bottles and packages. Failure
to follow chemical directions may result in serious injury, sickness, or even
death.