Filter
Top Products
4
1
Installation
Measurements between
centerlines of panel cut-
outs are the minimum
recommended.
Unpacking and Inspection
1. Inspect shipping carton for obvious signs of mishandling.
2. After removing the controller from the shipping carton,
inspect it carefully for damage. Never attempt to install
and use a damaged unit.
3. Verify that the ordering code number indicated on the side
of the controller matches what was ordered.
Figure 1.
Recommended Panel Layout for Multiple Controllers
C
L
C
L
C
L
C
L
2.850” (72.4 mm)
2.150” (54.6 mm)