Filter
Top Products
20
21
Output Menu
Display Parameter Selection
Output 1 Alarm Action
(Latching)
(Normal)
Output 1 Alarm Operation (Process Low)
(Process High)
(Inverse Band)
(Normal Band)
(Deviation Low)
(Deviation High)
Output 1 Alarm Delay 0-9999 sec
Output 1 Alarm Inhibit 0-9999 sec
Output 1 Alarm Setpoint Span of Sensor
Output 2 Alarm Action
(Latching)
(Normal)
Output 2 Alarm Operation (Process Low)
(Process High)
(Inverse Band)
(Normal Band)
(Deviation Low)
(Deviation High)
Output 2 Alarm Delay* 0-9999 sec
Output 2 Alarm Inhibit** 0-9999 sec
Output 2 Alarm Setpoint Span of Sensor
Note: The Control
Menu does not apply
to an Alarm Output
Type; therefore, the
Control Menu does
not appear.
Alarms A1 & A2 can
be set up using this
same information
in the menu.
Alarm Output Type
*Alarm Delay - the time delay between the detection of the alarm condition and the
initiation and indication of the output action.
**Alarm Inhibit - prevents low setpoint alarm activation during cold startup applications.