Filter
Top Products
Input
Used to select sensor-related parameters, such as input type,
limits, and scaling.
Display
Used to set or change decimal position and display units.
Output Used to specify output usage, control methods, and alarms.
Control
Used to select parameters associated with the control methods.
Alarm
Used to select alarm parameters .
Note: This menu is also functional for controllers not
equipped with alarm hardware; however, alarm indication
will be only visual via the A1 and A2 LEDs on the front panel.
Tune
Used to set the autotune damping parameter.
Recipe
Used to set ramp and soak parameters.
Supervisor
Used to set fail-safe and supervisory parameters.
Calibration
Used to recalibrate input.
Option
Used to select installed option.
Communications
(Option) Used to set serial communications parameters.
Contact/Digital
Input
(Option) Used to select switch input functions.
Remote Analog
Setpoint
(Option) Used to enter remote analog setpoint parameters.
Auxiliary Output
(Option) Used to set auxiliary output parameters.
14
Menus and Parameter
Descriptions
Menus and Parameters