Filter
Top Products
OPERATION
1900 07/11 Operation Section 4-2
© 2011 Alamo Group Inc.
OPERATION
RHINO 1900 BOOM MOWER
OPERATING INSTRUCTIONS
Rhino Boom mowers are manufactured with quality material by skilled workers. These mowers are designed
for cutting grass and small weeds. The mower is equipped with protective deflectors to prevent objects being
thrown from the mower by the blades, however, no shielding is 100% effective. All shields, guards, and
deflectors equipped on the mower must be maintained in good operational condition.
It is the operator’s responsibility to be knowledgeable of all potential operating hazards and to take every
reasonable precaution to ensure oneself, others, animals, and property are not injured or damaged by the
mower, tractor, or a thrown object. Do not operate the mower if passersby, pets, livestock, or property are
within 100 yards of the unit.
• All THROWN OBJECT SHIELDING including, Front and Rear Deflectors and Skid Shoes are in place and
in good condition when mowing.
• Mower is adjusted to be close and parallel to ground without exposing blades.
• MOWING AREA has been inspected and foreign materials and debris have been removed.
• PASSERSBY are inside enclosed vehicle.
This section of the Operator’s Manual is designed to familiarize, instruct, and educate safe and proper mower
use to the operator. Pictures contained in this section are intended to be used as a visual aid to assist in
explaining the operation of a mower and are not specific to any model. Some pictures may show shields
removed for picture clarity. NEVER operate implement without all shields in place and in good operational
condition. The operator must be familiar with the mower and tractor and all associated safety practices before
operating the mower and tractor. Proper operation of the mower, as detailed in this manual, will help ensure
years of safe and satisfactory use of the mower.
IMPORTANT: To avoid mower damage, retorque all bolts after the first 10 hours of operation. Refer to the
Torque Chart at the end of the Maintenance Section to ensure bolts are properly tightened.
READ AND UNDERSTAND THE ENTIRE OPERATING INSTRUCTIONS AND SAFETY SECTION OF THIS
MANUAL AND THE TRACTOR MANUAL BEFORE ATTEMPTING TO USE THE TRACTOR AND
IMPLEMENT. If you do not understand any of the instructions, contact your nearest authorized dealer for a
full explanation. Pay close attention to all safety signs and safety messages contained in this manual and
those affixed to the implement and tractor. OPS-U- 0001
READ, UNDERSTAND, and FOLLOW the following Safety Messages. Serious injury or
death may occur unless care is taken to follow the warnings and instructions stated in the
Safety Messages. Always use good common sense to avoid hazards.
(SG-2)
Si no lee ingles, pida ayuda a alguien que si lo lea para que le traduzca las
medidas de seguridad.
(SG-3)