Filter
Top Products
Operation 9
MAN0169 (Rev. 8/26/2005)
OPERATION
The operator is responsible for the safe operation of
this equipment. Operators must be instructed in and be
capable of the safe operation of the equipment, its
attachments and all controls. Do not allow anyone to
operate this equipment without proper instructions.
This equipment is designed for a wide range of applica-
tions. The blade may be used for scraping, leveling,
grading and backfilling. The rake may be used for loos-
ening, leveling and clearing soil of debris.
The blade or rake may be angled to windrow debris to
the side for removal.
Never allow children or untrained persons to
operate equipment.
Keep bystanders away from equipment.
Never allow riders on power unit or attachment.
A minimum 20% of tractor and equipment
weight must be on the tractor front wheels when
attachments are in transport position. Without this
weight, tractor could tip over, causing personal
injury or death. The weight may be attained with a
loader, front wheel weights, ballast in tires or front
tractor weights. Weigh the tractor and equipment.
Do not estimate.
Always wear relatively tight and belted clothing
to avoid entanglement in moving parts. Wear
sturdy, rough-soled work shoes and protective
equipment for eyes, hair, hands, hearing, and head;
and respirator or filter mask where appropriate.
CONNECT REAR BLADE OR
RAKE TO TRACTOR
1. This rake or blade should be mounted on tractors
with a maximum drawbar rating of 25 engine hp,
not to exceed 2000 lbs.
2. Adjust or remove tractor drawbar to eliminate
interference with blade or rake.
Category 1
1. Place tractor 3-point lower lift arms over outer hitch
pins.
2. Secure with klik pin (not provided) as shown in
Figure 1.
3. Connect tractor top link by inserting tractor clevis
pin into top hitch point on rear blade frame
assembly and secure (Figure 2).
Figure 1. Lower Lift Arm Attachment, Category 1
Figure 2. Top Link Connection
Quick Hitch (Category 1 Only)
The LRC and RBC will attach to a Category 1 quick
hitch.
1. Use Bushing Kit 1004653 when using a quick
coupler.
2. Place bushings over mounting pin and secure into
position.
3. Align quick hitch with mounting pins and top hole
on rear blade frame assembly.
Category 0 (Optional)
1. Place tractor 3-point lower lift arms over inner hitch
pins.
2. Secure with safety pins (not provided) as shown in
Figure 3.
CAUTION
DP5
DP7