Filter
Top Products
Operation 11
MAN0169 (Rev. 8/26/2005)
Only offset blade when operating in light material such
as sand, loose soil, or snow.
Figure 6. Moldboard Offset Left
Backfilling
Reverse blade for backfilling ditches or trenches (see
Reversing).
The rake may also be used in light backfilling applica-
tions.
Cutting Ditches (Blade Only)
Angle blade to bring lower end forward. Bring lower
point near the center line of the rear wheel track using
3-point hitch height adjustment.
Parking Stand Placement
Operating Position
1. Place parking stand (11) between 3-point mast
plates as shown in Figure 7.
2. Secure into position using lock pin (20).
Figure 7. Parking Stand - Operating Position
Storage Position
1. Raise tractor 3-point lift arms.
2. Remove parking stand from operating position
(Figure 7).
3. Align top holes on parking stand and lowest holes
on 3-point mast plates as shown in Figure 8.
4. Secure into position using lock pin (20).
Figure 8. Parking Sand - Storage Position
CD6156-1
CD6161B
20
11
11. Parking stand
20. 1/4 x 2-1/2 Lock pin