Filter
Top Products
4 Introduction
MAN0169 (Rev. 5/6/2005)
SPECIFICATIONS
RBC60 LRC60
Overall Width 60 inches 60 inches
Weight 182 lbs. 177 lbs.
Moldboard Thickness 7-gauge -----------
Cutting Edge 1/2" x 6" x 60" Reversible ----------
Teeth ---------- 30 - 5/16" x 1"
HT High Carbon Tines
Position 360° Pivot 360° Pivot
Offset - Left or Right 12 inches -----------
Angle - Left or Right 15° or 30° 15° or 30°
Pitch Adjustment Controlled by top link Controlled by top link
Tractor Rating Max. Engine 25 hp Max. Engine 25 hp
Tractor 3-Point Cat 0 or 1 Cat 0 or 1
Options Skid Shoe & Cat 1 Gauge Wheels & Cat 1
Quick Hitch Bushing Kit Quick Hitch Bushing Kit
Quick Hitch Cat 1 Cat 1
Parking Stand Included Included
GENERAL INFORMATION
The purpose of this manual is to assist you in operating
and maintaining your equipment. Read it carefully. It
furnishes information and instructions that will help you
achieve years of dependable performance.
These instructions have been compiled from extensive
field experience and engineering data. Some informa-
tion may be general in nature, due to unknown and
varying operating conditions. However, through experi-
ence and these instructions, you should be able to
develop procedures suitable to your particular situa-
tion.
The illustrations and data used in this manual were cur-
rent at the time of printing. However, due to possible
inline production changes, your machine may vary
slightly in detail. We reserve the right to redesign and
change the machines as may be necessary without
notification.
Throughout this manual, references are made to right
and left directions. These are determined by standing
behind the tractor facing the direction of forward travel.
(Rev 3/9/2010)