Filter
Top Products
Owner Service 13
32695 (Rev. 11/17/2006)
Figure 3. Blade Assembly
Figure 4. Blade Sharpening
LUBRICATION
■ Always wear safety glasses and ear protection
when performing service or maintenance functions
that could cause injury to eyes or ears.
See Figure 5 and Figure 6. Be familiar with and follow
all safety rules and decals.
■ Lower mower to ground, shut off tractor engine
and remove key before servicing.
Do not let excess grease collect on or around parts,
particularly when operating in sandy areas. The
accompanying illustrations give the lubrication points
and frequency. The hours are based on normal operat-
ing conditions. Severe or unusual conditions may
require more frequent lubrication.
Use a SAE multi-purpose type grease for all locations
shown. Be sure to clean fitting thoroughly before using
grease gun.
IMPORTANT
■ Do not over grease blade spindles. Excess
grease could be transferred to the belt and cause
slippage and premature failure.
Figure 5. Spindle Lubrication
Figure 6. Caster Lubrication
1. Blade Wrench
2. Shoulder Washer
3. Clutch Disc
4. Blade Stop
5. Blade
6. Shim Washer
7. Cup Washers
8. Sleeve
9. Washer (special)
10. Bolt (special)
A CAUTION
A WARNING