Filter
Top Products
4 Introduction
MAN0646 (7/6/2007)
SPECIFICATIONS
Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . Kubota 3-cylinder, 4-cycle, liquid cooled
(See engine manual for complete specifications)
Horsepower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 HP
Fuel Type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Diesel
Standard Tire Size: Front . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 x 10.50 - 12
Rear . . . . . . . . . . . . . . . . . . . . . . . . . . .15 x 6.00 - 6 Rib
Recommended Tire Pressure:
Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 psi
Rear . . . . . . . . . . . . . . . . . . . . . . . . . . .Maximum 18 psi
Power Unit Dimensions: Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50"
Overall Length. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87"
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1020 lbs
Fuel Tank Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.0 Gallons
Recommended Mower Decks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52", 61", 72"
GENERAL INFORMATION
Some illustrations in this manual show the
equipment with safety shields removed to provide
a better view. This equipment should never be
operated with any necessary safety shielding
removed.
The purpose of this manual is to assist you in operating
and maintaining your Mow’n Machine. Read it carefully.
It furnishes information and instructions that will help
you achieve years of dependable performance. These
instructions have been compiled from extensive field
experience and engineering data. Some information
may be general in nature due to unknown and varying
operating conditions. However, through experience
and these instructions, you should be able to develop
procedures suitable to your particular situation.
The illustrations and data used in this manual were cur-
rent at the time of printing but, due to possible inline
production changes, your machine may vary slightly in
detail. We reserve the right to redesign and change the
machines as may be necessary without notification.
Throughout this manual, references are made to right
and left directions. These are determined by standing
behind the equipment facing the direction of forward
travel.
(Rev. 11/5/2007)