Filter
Top Products
- 8 -
5) Lift the side panel (L) and put it aside.
6)
Disconnect the fan motor harness from CN19 on the Main PC board, and then separate the side panel
(L).
7) Remove the SM-4x8 screw that secures the operation panel ass’y.
8) Half open the top cover, otherwise the operation panel ass’y cannot be removed from the printer.
9) Lift the operation panel ass’y to release the hook, and then remove the operation panel ass’y by
moving it forward.
Operation Panel Ass’
y
Top Cover
SM-4x8 Screw
Side Panel (L) Fan Motor Harness
Fan Motor
CN19
Main PC Board