Filter
Top Products
- 13 -
24) Fix the harness ass’y with the clamp.
25) Connect the 9-pin connector of the harness ass’y to CN15, and 2-pin connector to CN18 on the
Main PC board, respectively.
26) Connect the four harnesses of the cutter unit to CN8, CN10, CN11 and CN12 on the cutter drive
unit.
Main PC Board
Clamp
Cutter Unit
Cutter Drive Unit
CN18 (2 pins)CN15 (9 pins)
Harness Ass’y
CN8
CN12
CN10
CN11