Filter
Top Products
- 5 -
16) Connect the four harnesses of the cutter unit to CN8, CN10, CN11 and CN12 on the cutter drive
unit.
17) Fit the two tabs of the cutter drive unit into the notches, and then fix the cutter unit with the three
SM-4x8 screws.
Cutter Unit
Cutter Drive Unit
Print Head Block
Cutter Unit
CN8
CN12
CN10
CN11
SM-4 x 8 Screw
Notch
Tab
Notch
Tab
SM-4 x 8 Screw