Filter
Top Products
BASIC OPERATIONS
PREPARATIONS BEFORE MEASUREMENT
Turn ON the Power
1
Make sure the power cable is connected.
For connection, see “HOW TO CONNECT THE POWER CABLE” on page 14.
2
Make sure the instrument is in the no-patient condition and turn ON the
POWER SWITCH
.
3
The Title screen is displayed, and then the Measurement screen is displayed.
Air Check
This machine is equipped with a function for checking the correct operations measure-
ment system inside the instrument.
1
Remove the measuring window cap.
2
Press on the control panel.
Air is ejected from the measuring nozzle and checking is done automatically.
3
Make sure “OK” is displayed on the monitor screen. The Menu screen should be
displayed a few seconds afterwards.
29
BASIC OPERATIONS
Normal operation screen