Filter
Top Products
8
Set the printer cover, holding the top of the paper outside.
HOW TO RESET FROM POWER SAVE STATUS
This machine employs a power save function. If the machine is not used during a set
time, the power save function stops supplying power to the monitor and CCD camera.
Under the power save status, the POWER lamp of the control panel flashes.
1
Press
MEASUREMENT SWITCH
.
The Monitor screen is displayed in a few seconds, when the measurements become
available.
28
PREPARATIONS
If the paper is jammed, turn the paper retainer lever to the illustrated position, and
take out the jammed paper from the printer.
After resetting, the measurement mode is AUTO and the measuring range is 0-30.
Also, values measured before power saving are deleted.