Filter
Top Products
PREPARATIONS
HOW TO INSTALL THE INSTRUMENT
1
Fasten the clamping knob.
2
Hold the instrument body firmly at the specified positions and place it on the auto-
matic instrument table.
For the automatic instrument table, see “OPTIONAL ACCESSORIES” on page 46.
3
After installing the instrument, loosen the fixing knob.
Now the body components can be moved.
4
If the machine body is slightly off level, properly turn the adjusters at the four corners
for fine adjustment.
Do not unscrew the adjusters more than 1cm.
13
PREPARATIONS
Before carrying the instrument, be sure to affix it firmly by
turning the fixing screw at the base.
If the instrument is moved with the screw loosened, it may
result in damage to the instrument.
CAUTION
When moving the instrument, be sure to hold it at the bottom surface
with two people. Carrying by one person may cause back injury or
injury by falling parts. Also, holding areas other than the bottom sur-
face may cause pinching fingers between parts and injury by falling
parts as well as damage to the instrument.
CAUTION
To avoid potential injury, hold the instrument in the proper
position.
CAUTION
Holding the instrumentSpecified holding positions
Fixing knob