Assembly Section 3-10
FLX15/10 04/06
© 2006 Alamo Group Inc.
ASSEMBLY
ASSEMBLY
IMPORTANT: Check oil level in all gearboxes before operation. Refer to the ‘Lubrication’ section of
this manual for recommended oil type and viscosity.
Lubricate all grease fittings. Refer to the grease schedule in this manual.
Check that all nuts and bolts are in place and properly tightened. Refer to the ‘Maintenance’ section of
this manual for required bolt grades and torques.
Check that all tires are inflated to proper specifications. Refer to the ‘Maintenance’ section of this
manual for required tire pressures.
10. General
PRE CUSTOMER DELIVERY CHECKLIST
1. Is oil level in the geareboxes to correct level?
2. Has the proper oil been used in the Gearboxes?
3. Are the Tires clear of the Mainframe, even when turning during axle articulation?
4. Are all hoses tight and do not leak?
5. Are all decals in place? See manual for decal description and placement.
6. Does tractor pass Schulte Mower Stability Test?
7. Are all bolts tight?
8. Have all hoses been properly routed so that hoses do not kink or bind when arm is
articulated through all motions?
9. Is machine equipped with proper operator protection? ROPS TractorsMust have cage or
cage panels.
10. Does mower operate when on/off switch is on? Stop when switch is off?
11. Is blade rotaion correct? On the center section (looking from the top of the deck) rotation
should be clockwise so that debris will be thrown away from the tractor
12. Does mower operate smoothly at normal operating speed? Mower should not vibrate
excessively.