Filter
Top Products
6
English
De s C R i p t i o n
The Shindaiwa product you purchased has been factory pre-assembled for your convenience. Due to packaging restric-
tions, guide bar and saw chain installation and other assembly may be necessary.
After opening the carton, check for damage. Immediately notify your retailer or Shindaiwa Dealer of damaged or missing
parts. Use the contents list to check for missing parts.
EMISSION CONTROL
EPA PhAsE 2 / C.A.R.B. TIER III
The emission control system for the engine is EM/TWC (Engine
Modication and 3-way Catalyst) and for the fuel tank the Control
System is EVAP (Evaporative Emissions). Evaporative emission
may be applicable to California models only.
IMPORTANT ENGINE INFORMATION
ENGINE FAMILY:
7EXHS.0334KB DISPLACEMENT: 32.6 cc
EMISSION COMPLIANCE PERIOD : 300 HRS.
THIS ENGINE MEETS U.S. EPA PH2 EXH AND 2007
AND
LATER CALIFORNIA EXH AND EVAP EMISSION
REGULATIONS FOR S.O.R.E.
REFER TO OWNER’S MANUAL
FOR MAINTENANCE SPECIFICATIONS AND ADJUSTMENTS.
em i s s i o n Da t a
An Emission Control Label is located on the engine. (This is an
EXAMPLE ONLY, information on label varies by engine FAMILY).
PRODUCT EMISSION DURABILITY
The 300 hour emission durability compliance period is the time span selected by the manufacturer certifying the engine emis-
sions output meets applicable California and/or U.S. EPA emissions regulations, provided that approved maintenance proce-
dures are followed as listed in the Maintenance Section of this manual.
CONTENTS
Power Head 1 -
Guide Bar1 -
Kick Guard1 -
Hex Head Bolt1 -
Hex Nut1 -
Saw Chain1 -
Instruction Manual1 -
Warranty Registration Card1 -
Limited Warranty Statement1 -
T-Wrench1 -