Filter
Top Products
OPERATION
Disc Mower PRE-OPERATION Inspection
Tractor ID#____________
Make_________________
Date__________________
Shift_________________
Before conducting the inspection, make sure the tractor engine is off, all
rotation has stopped and the tractor is in park with the parking brake
engaged. Make sure the mower is resting on the ground or securely
blocked up and all hydraulic pressure has been relieved.
OPERATION
Item
Condition at
Start of Shift
Specific comment
if not O.K.
The flashing lights function properly
The SMV Sign is clean and visible
The tires are in good condition with proper pressure
The wheel lug bolts are tight
The tractor brakes are in good condition
The steering linkage is in good condition
There are no visible oil leaks
The hydraulic controls function properly
The ROPS or ROBS Cab is in good condition
The seatbelt is in place and in good condition
The 3-point hitch is in good condition
The drawbar pins are securely in place
The PTO master shield is in place
The engine oil level is full
The brake fluid level is full
The power steering fluid level is full
The fuel level is adequate
The engine coolant fluid level is full
The radiator is free of debris
The air filter is in good condition
Operator’s Signature:_________________________________________________
DO NOT OPERATE an UNSAFE TRACTOR or MOWER
AGM 52-62-72-82 10/10
Operation Section 4-27
© 2010 Alamo Group Inc.