Filter
Top Products
10-4-3
REASSEMBLY
(1)
Install the receptacles, no-fuse breaker,
terminals, switches, etc.
on
the control panel and wire them.
NOTE
:
Circuit diagrams are shown in Section
12.
Colored wires
are
used for easy identification, and are
of the correct capacity and size. Use heat-resistant type wires (permissible temperature range
75°C
or
over) in the specified gauge shown in the circuit diagrams.
(2)
Connect the wires
of
control panel components.
(3)
Attach the control panel to the control
box.
M4
screw
.
.
.8
pcs.
1.2
-
1.5
N-m
12
-
15
kgcrn
8.7
-
10.9
f"
-
52-