Filter
Top Products
English---3
115391527 Rev. 4 5/15/12
KEY TO SYMBOLS
Only intended for trimmer heads.
Use unleaded or quality leaded
89 or higher octane gasoline
and ISO--L--EGD certified or
JASO FD registered two--stroke
oil mixed at a ratio of 2% (50:1).
Othe r symbols/deca ls on the machine
refer to special certif ication req uiremen ts
for cer tain mark ets.
Stop the engine by pushi ng
and holding the st op switch
in the STOP position until the
engine st ops before carrying
out any checks or maintenanc e.
Regular cleaning is required.
Visual check.
Approved eye protection must
always be used.
Symbols
WARNING: Clearing saws, brush-
cutters and trimmers can be dan-
gerous! Careless or incor rect use
can result in serious or fatal
injury to the operator or others.
Please read the operator’ s manual
carefull y and make su re you
underst and the inst ructions
before using the machine .
Always wear:
S Hearing protection
S Appr oved eye protec tion
Watch out for thrown objects and
ricochets.
The operator of the machine
must ensure, while work ing,
that no persons or animals
come closer than 50 feet
(15 meters).
Arrows which show limits for
handle positioning.
Always wear approv ed protectiv e
gloves.
Wear sturdy, non--slip boots.
Only use non--metallic, flexible
cutting attachments, i.e. trimmer
heads with trimmer line.