Filter
Top Products
51
3. Using , or ., scroll through the list of available IDs and select the desired ID with the
M key.
ProGrammer provides dialogs for entering and editing canned messages, forms
and replies, as well as certain fixed information related to Radio TextLink.
ProGrammer also manages the list of MIDs and certain addresses needed for
Radio TextLink. Consult the On-Line Help utility in ProGrammer for
instructions and explanations of Radio TextLink configuration.
12.14.2 To View Received Messages
1. Select RD MAIL with the M key and scroll through the list of received messages using
, or ..
2. Selecting a received message with the M key will bring up a reply to sender option.
12.14.3 To Delete Messages
Selecting DEL MAIL with the M key will allow you to delete ALL of the messages in the
inbox.
12.14.4 To View The Current Time
Select TIME with the M key to retrieve the current date and time.
12.15 PAGE (P25 TRUNKED ONLY)
Page sends a PING message to a radio and functions similar to Individual Call.
The following procedures describe how to initiate and complete a Page.
1. To select a previously stored individual, select the Page mode from the menu followed by the RAMP
control , or . to scroll through the list of stored individuals. The selection mode rules apply.
While in the individual call list, the menu key will toggle the display between the call name and the
unit ID number. On System model radios, the individual’s unit ID can also be entered directly from the
keypad.
2. Press the PTT button; the radio performs the necessary signaling on the control channel. On the calling
radio, line 1 shows the called individual's name if found in the list of stored individuals or ID followed
by the logical ID number of the unit being called. If the receiving radio receives the Page and
responds, both radios will emit three high-pitched tones. The receiving radio will also display PAGE
and the ID of the calling radio.