Filter
Top Products
17
7 USER INTERFACE
The M7100
IP
operating controls are located on the radio's front panel (see Figure 7-1and Figure 7-2). A
keypad, vacuum florescent display for radio status information and a microphone jack are on the front
panel. The front panel also provides a rotary SYSTEM/GROUP/CHANNEL knob, POWER ON-
OFF/VOLUME control, a ramp up/ramp down control, Scan add/delete control, and a SCAN ON-OFF
control for scan operation.
The keypad is used for manual number entry for individual calls, access to a telephone interconnect system
and activation of various EDACS, P25 Trunked, or conventional features such as menu selection. Each key
has an associated LED for status indication.
The display has two lines with eight alphanumeric-characters used to show the operational mode of the
radio. There is one LED for indicating transmitter ON and one LED to indicate CHANNEL BUSY
located below the POWER ON-OFF/VOLUME Control.
Figure 7-1: M7100
IP
Series Mobile Radio System Model Front Panel
Figure 7-2: M7100
IP
Series Mobile Radio Scan Model Front Panel